R2511-HP MSR Router Series IP Multicast Command Reference(V5)

454
Examples
# Disable updates sent to IPv6 MBGP peer 1:2::3:4 from carrying private AS numbers.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 public-as-only
peer reflect-client (IPv6 MBGP address family view)
Use peer reflect-client to configure the router as a route reflector and specify an IPv6 MBGP peer or a
peer group as its client.
Use undo peer reflect-client to remove the configuration.
Syntax
peer { ipv6-group-name | ipv6-address } reflect-client
undo peer { ipv6-group-name | ipv6-address } reflect-client
Default
Neither route reflector nor client is configured.
Views
IPv6 MBGP address family view
Default command level
2: System level
Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IPv6 address.
Examples
# Configure the local device as a route reflector and specify the peer group test as a client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test internal
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer test enable
[Sysname-bgp-af-ipv6-mul] peer test reflect-client
Related commands
• reflect between-clients
• reflector cluster-id