R2511-HP MSR Router Series IP Multicast Command Reference(V5)

69
display pim neighbor
Use display pim neighbor to display PIM neighbor information.
Syntax
display pim [ all-instance | vpn-instance vpn-instance-name ] neighbor [ interface interface-type
interface-number | neighbor-address | verbose ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number.
neighbor-address: Specifies a PIM neighbor.
verbose: Displays the detailed PIM neighbor information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays PIM neighbor information on
the public network.
Examples
# Display information about all PIM neighbors on the public network.
<Sysname> display pim neighbor
VPN-Instance: public net
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires Dr-Priority Mode
10.1.1.2 Eth1/1 02:50:49 00:01:31 1 B
20.1.1.2 Eth1/2 02:49:39 00:01:42 1 B
# On the public network, display detailed information about the PIM neighbor whose IP address is
11.110.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
VPN-Instance: public net
Neighbor: 11.110.0.20
Interface: Ethernet1/3