R2511-HP MSR Router Series IP Multicast Command Reference(V5)

{ interface-type interface-number | register } | mode mode-type | flags flag-value | fsm ] * [ | { begin

| exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

all-instance: Specifies all VPN instances.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31

characters.

group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.

source-address: Specifies a multicast source address.

mask: Specifies the mask of the multicast group/source address, 255.255.255.255 by default.

mask-length: Specifies the mask length of the multicast group/source address. The value range is 0 to 32.

The system default is 32.

incoming-interface: Specifies an incoming interface.

interface-type interface-number: Specifies an interface by its type and number.

outgoing-interface: Specifies an outgoing interface.

include: Specifies an interface in the outgoing interface list.

exclude: Specifies an interface not in the outgoing interface list.

match: Specifies an interface that only exists in the outgoing interface list.

mode mode-type: Specifies a PIM mode, where mode-type can have the following values:

• dm: Specifies PIM-DM.

• sm: Specifies PIM-SM.

• ssm: Specifies PIM-SSM.

flags flag-value: Specifies a flag. The values of flag-value and their meanings are as follows:

• 2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP

peer.

• act: Specifies PIM routing entries that have been used for routing data.

• bidir: Specifies PIM routing entries created by BIDIR-PIM.

• del: Specifies PIM routing entries scheduled to be deleted.

• exprune: Specifies PIM routing entries containing outgoing interfaces pruned by other multicast

routing protocols.

• ext: Specifies PIM routing entries containing outgoing interfaces provided by other multicast routing

protocols.

• loc: Specifies PIM routing entries on the devices that directly connect to the same subnet as the

multicast source.

• msdp: Specifies PIM routing entries learned from MSDP SA messages.