R2511-HP MSR Router Series IP Multicast Configuration Guide(V5)

187
configure static RPF peering relationships for the MSDP peers to share multicast source information
among the PIM-SM domains.
Figure 55 Network diagram
Table 15 shows the interface and IP address assignment, and network topology scheme.
Table 15 Interface and IP address assignment
Device Interface
IP address
Source 1 — 192.168.1.100/24
Source 2 — 192.168.3.100/24
Router A Ethernet 1/1 10.110.1.1/24
Router A Ethernet 1/2 10.110.2.1/24
Router A Loopback 0 1.1.1.1/32
Router B Ethernet 1/1 10.110.1.2/24
Router B Ethernet 1/2 192.168.1.1/24
Router B POS 5/0 10.110.3.1/24
Router C Ethernet 1/1 10.110.2.2/24
Router C Ethernet 1/2 192.168.2.1/24
Router C Serial 2/0 10.110.4.1/24
Router D Ethernet 1/1 10.110.5.1/24
Router D POS 5/0 10.110.3.2/24
Router D Loopback 0 2.2.2.2/32
Router E Ethernet 1/1 10.110.5.2/24
Router E Ethernet 1/2 192.168.3.1/24
POS5/0
S
2
/
0
Router B
Router A
Source 1
AS 100
PIM-SM 1
PIM-SM 3
PIM-SM 2
Loop0
Router D Router E
Router F
Router G
Source 2
Eth1/2
Et
h1/1
POS5/0 Eth1/1
Eth1/1
Loop0
Receiver
Receiver
Loop0
BGP peers
Eth1
/1
Eth1/1
Eth1/1
Eth1
/2
Eth
1/
2
AS 200
S
2
/
0
Eth1/1
Eth1/2
Eth1/2
Router C