R2511-HP MSR Router Series IP Multicast Configuration Guide(V5)

315
To configure the IPv6 PIM-DM graft retry period:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the graft retry
period.
pim ipv6 timer graft-retry interval
Optional.
3 seconds by default.
Configuring IPv6 PIM-SM
This section describes how to configure IPv6 PIM-SM.
IPv6 PIM-SM configuration task list
Task Remarks
Enabling IPv6 PIM-SM Required.
Configuring an RP
Configuring a static RP
Required.
Use any method.
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally Optional.
Configuring a BSR
Configuring a C-BSR Required.
Configuring an IPv6 PIM domain border Optional.
Configuring C-BSR parameters globally Optional.
Configuring C-BSR timers Optional.
Disabling BSM semantic fragmentation Optional.
Configuring IPv6
administrative scoping
Enabling IPv6 administrative scoping Optional.
Configuring an IPv6 admin-scoped zone boundary Optional.
Configuring C-BSRs for IPv6 admin-scoped zones Optional.
Configuring IPv6 multicast source registration Optional.
Configuring switchover to SPT Optional.
Configuring common IPv6 PIM features Optional.
Configuration prerequisites
Before you configure IPv6 PIM-SM, complete the following tasks:
• Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
domain are interoperable at the network layer.