R2511-HP MSR Router Series IP Multicast Configuration Guide(V5)

434
Clearing IPv6 MBGP information
Task Command Remarks
Clear dampened IPv6
MBGP routing information
and release suppressed
routes.
reset bgp ipv6 multicast dampening [ ipv6-address
prefix-length ]
Available in user view.
Clear IPv6 MBGP route flap
statistics.
reset bgp ipv6 multicast flap-info
[ ipv6-address/prefix-length | regexp
as-path-regexp | as-path-acl as-path-acl-number ]
Available in user view.
IPv6 MBGP configuration example
Network requirements
IPv6 PIM-SM 1 is in AS 100 and IPv6 PIM-SM 2 is in AS 200. OSPFv3 is the IGP in the two ASs, and IPv6
MBGP runs between the two ASs to exchange IPv6 multicast route information.
The multicast source belongs to IPv6 PIM-SM 1, and the receiver belongs to IPv6 PIM-SM 2.
The POS 5/0 of Router A and Router B must be configured as the C-BSR and C-RP of the IPv6 PIM-SM
domains, respectively.
Figure 110 Network diagram
Device Interface IP address Device Interface IP address
Source N/A 1002::100/64 Router C Eth1/1 3002::1/64
Router A Eth1/1 1002::1/64 S2/0 3001::1
/
64
POS5/0 1001::1/64 S2/1 2001::2
/
64
Router B POS5/0 1001::2/64 Router D S2/0 2002::2/64
S2/0 2001::1
/
64 S2/1 3001::2
/
64
S2/1 2002::1
/
64
S
2
/
0
S
2
/
1
S
2
/
0
S
2
/
1
E
t
h
1
/
1