R2511-HP MSR Router Series IPX Command Reference(V5)

9
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IPX packet statistics.
<Sysname> display ipx statistics
Received: 0 total, 0 packets pitched
0 packets size errors, 0 format errors
0 bad hops(>16), 0 discarded(hops=16)
0 other errors, 0 local destination
0 can not be dealt with
Sent: 0 forwarded, 0 generated
0 no route, 0 discarded
RIP: 0 sent, 0 received
0 responses sent, 0 responses received
0 requests received, 0 requests dealt
0 requests sent, 0 periodic updates
SAP: 0 general requests received
0 specific requests received
0 GNS requests received
0 general responses sent
0 specific responses sent
0 GNS responses sent
0 periodic updates, 0 errors
PING: 0 requests sent, 0 requests received
0 responses sent, 0 responses received
0 responses in time, 0 responses time out
ipx enable
Use ipx enable to enable IPX.
Use undo ipx enable to disable IPX.
Syntax
ipx enable [ node node ]
undo ipx enable
Default
IPX is disabled.