R2511-HP MSR Router Series IPX Command Reference(V5)

11
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipx encapsulation ethernet-2
ipx netbios-propagation
Use ipx netbios-propagation to enable the interface to forward the type 20 broadcast packets.
Use undo ipx netbios-propagation to disable the interface from forwarding the type 20 broadcast
packets.
Syntax
ipx netbios-propagation
undo ipx netbios-propagation
Default
Type 20 broadcast packets are not forwarded.
Views
Interface view
Default command level
2: System level
Examples
# Enable Ethernet 1/1 to forward type 20 broadcast packets.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipx netbios-propagation
ipx network
Use ipx network to configure a network ID for the interface.
Use undo ipx network to delete the IPX network ID of the interface.
Syntax
ipx network network-number
undo ipx network
Default
No network ID is allocated to an interface. IPX is still disabled on the interface after IPX is enabled in
system view.
Views
Interface view
Default command level
2: System level
Parameters
network-number: IPX network ID in hexadecimal format. The value range is 0x1 to 0xFFFFFFFD. Leading
0s can be omitted.