R2511-HP MSR Router Series IPX Command Reference(V5)

12
Examples
# Assign network ID 675 to Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipx network 675
ipx rip import-route static
Use ipx rip import-route static to enable static route redistribution into RIP.
Use undo ipx rip import-route static to disable static route redistribution.
Syntax
ipx rip import-route static
undo ipx rip import-route static
Default
IPX RIP does not redistribute static routes.
Views
System view
Default command level
2: System level
Usage guidelines
RIP only redistributes active static routes.
Examples
# Enable static route redistribution to RIP.
<Sysname> system-view
[Sysname] ipx rip import-route static
ipx rip mtu
Use ipx rip mtu to configure the maximum RIP updating packet size.
Use undo ipx rip mtu to restore the default.
Syntax
ipx rip mtu bytes
undo ipx rip mtu
Views
Interface view
Default command level
2: System level
Parameters
bytes: Maximum RIP updating packet size in the range of 432 to 1500 bytes.