R2511-HP MSR Router Series IPX Command Reference(V5)

14
Use undo ipx rip timer update to restore the default.
Syntax
ipx rip timer update seconds
undo ipx rip timer update
Default
The update interval is 60 seconds.
Views
System view
Default command level
2: System level
Parameters
seconds: RIP updating interval in the range of 10 to 60000 seconds.
Examples
# Specify a RIP update interval of 30 seconds.
<Sysname> system-view
[Sysname] ipx rip timer update 30
Related commands
ipx rip multiplier
ipx route-static
Use ipx route-static to configure an IPX static route.
Use undo ipx route-static to remove an IPX static route.
Syntax
ipx route-static dest-network { network.node | interface-type interface-number } [ preference value ] [ tick
ticks hop hops ]
undo ipx route-static { dest-network [ nexthop-addr | interface-type interface-number ] | all }
Default
The IPX static route with a destination network ID of 0xFFFFFFFE is the default route.
Views
System view
Default command level
2: System level
Parameters
dest-network: Destination network ID of the IPX static route, an 8-digit hexadecimal number in the range
of 0x1 to 0xFFFFFFFE.
network.node: Next hop address of the IPX static route. network is an 8-digit hexadecimal number in the
range of 0x1 to 0xFFFFFFFD. The 48-bit node consists of three 4-digit hexadecimal numbers, separated
by hyphen (-); when entered, the leftmost 0s can be omitted.