R2511-HP MSR Router Series IPX Command Reference(V5)

19
Default
The value is 480 bytes. The size of the IPX header plus SAP header is 32 bytes, so a 480-byte SAP
updating packet contains 7 service information items (64 bytes each).
Views
Interface view
Default command level
2: System level
Parameters
bytes: Maximum SAP packet size in the range of 480 to 1500 bytes.
Examples
# Set the maximum size of SAP updating packets on Ethernet 1/1 to 674 bytes (10 service information
items at most).
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipx sap mtu 674
ipx sap multiplier
Use ipx sap multiplier to configure the aging interval of SAP service information items.
Use undo ipx sap multiplier to restore the default.
Syntax
ipx sap multiplier multiplier
undo ipx sap multiplier
Default
The default aging time is three times the IPX SAP update interval.
Views
System view
Default command level
2: System level
Parameters
multiplier: Value multiplied by the updating interval to yield the aging interval for SAP service information
items. The value range is 1 to 1000.
Examples
# Set the aging interval of SAP service information items to be 5 times the updating interval.
<Sysname> system-view
[Sysname] ipx sap multiplier 5
Related commands
ipx sap timer update