R2511-HP MSR Router Series IPX Command Reference(V5)

22
Syntax
ipx tick ticks
undo ipx tick
Default
The delay on an Ethernet or a VLAN interface is 1 tick, that on an asynchronous serial port is 30 ticks,
and that on a synchronous serial port is 6 ticks.
Views
Interface view
Default command level
2: System level
Parameters
ticks: Delay in the range of 0 to 30000 ticks. 1 tick is 1/18 second (approximately 55 ms).
Examples
# Configure the delay for sending IPX packets as 5 ticks on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface Ethernet 1/1
[Sysname-Ethernet1/1] ipx tick 5
ipx update-change-only
Use ipx update-change-only to enable the triggered update feature on the current interface.
Use undo ipx update-change-only to disable the triggered update feature on the current interface.
Syntax
ipx update-change-only
undo ipx update-change-only
Default
The triggered update feature is disabled on an interface.
Views
Interface view
Default command level
2: System level
Examples
# Enable the triggered update feature on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface Ethernet 1/1
[Sysname-Ethernet1/1] ipx update-change-only
ping ipx
Use ping ipx to check host reachability and network connectivity in an IPX network.