R2511-HP MSR Router Series IPX Command Reference(V5)

23
Syntax
ping ipx network.node [ -c count | -s size | -t timeout ] *
Views
Any view
Default command level
0: Visit level
Parameters
network.node: Destination address. The argument network is an 8-bit hexadecimal number in the range
of 0x1 to 0xFFFFFFFD. The argument node is a 48-bit value represented by a triplet of 4-digit
hexadecimal numbers separated by hyphen (-). The 0s in front can be omitted when inputting.
-c count: Number of ping packets to be sent. By default, the value is 5. The value range for the count
argument is 1 to 4294967295.
-s size: Ping packet size, in bytes. By default, the value is 100 bytes. The value range for the size
argument is 44 to 1500.
-t timeout: Timeout interval of ping packets, in milliseconds. By default, the value is 2 milliseconds. The
value range for the timeout argument is 0 to 65535.
Examples
# Ping the destination at 675.0000-a0b0-fefe.
<Sysname> ping ipx 675.0000-a0b0-fefe
reset ipx statistics
Use reset ipx statistics to clear IPX statistics.
Syntax
reset ipx statistics
View
User view
Default command level
1: Monitor level
Examples
# Clear IPX statistics.
<Sysname> reset ipx statistics
reset ipx routing-table statistics protocol
Use reset ipx routing-table statistics protocol to clear the statistics of a specified IPX route type.
Syntax
reset ipx routing-table statistics protocol { all | default | direct | rip | static }
Views
User view