R2511-HP MSR Router Series IPX Command Reference(V5)

1
IPX configuration commands
display ipx interface
Use display ipx interface to display IPX information on a specified interface.
Syntax
display ipx interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Displays IPX information for an interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, the command displays information about all IPX interfaces.
Examples
# Display IPX information on Ethernet 1/1.
<Sysname> display ipx interface ethernet 1/1
Ethernet1/1 is up
IPX address is 1.0000-5e19-1d01 [up]
SAP is enabled
Split horizon is enabled
Update change only is disabled
Forwarding of IPX type 20 propagation packet is disabled
Delay of this IPX interface, in ticks is 1
SAP GNS response is enabled
RIP packet maximum size is 432 bytes
SAP packet maximum size is 480 bytes
IPX encapsulation is Netware 802.3
0 received, 2 sent
0 bytes received, 74 bytes sent
0 RIP received, 1 RIP sent, 0 RIP discarded