R2511-HP MSR Router Series IPX Command Reference(V5)

5
Field Descri
p
tion
Protocol Protocol type of the route.
Preference Preference of the route.
Ticks Delay time of the route in ticks (a tick is 1/18 second).
Hops Hop value of the route.
Nexthop Next hop of the route.
Time
Aging time of the route. 0 for directly connected routes and static
routes, which do not age.
Interface Address and name of the outbound interface.
State State of the route, which could be active or inactive.
display ipx routing-table protocol
Use display ipx routing-table protocol to display IPX routing information for the specified route type.
Syntax
display ipx routing-table protocol { default | direct | rip | static } [ inactive | verbose ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
default: Displays default routing information.
direct: Displays all direct routing information.
rip: Displays all IPX RIP routing information.
static: Displays all IPX static routing information.
inactive: Displays inactive routing information.
verbose: Displays detailed routing information, including active and inactive routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The command displays classified active and inactive routes if the inactive and verbose keywords are not
specified.