R2511-HP MSR Router Series IPX Configuration Guide(V5)

7
The maximum queue length of the same service type items does not limit the amount of static service
information but the amount of dynamic service information. If the newly configured queue length is less
than the original length, the table items in the service information table will not be deleted; if the amount
of service information for the same service type reaches the configured value, new service information
items will not be added.
To configure IPX service information:
Ste
p
Command Remar
k
1. Enter system view.
system-view N/A
2. Add an IPX static service information
item.
ipx service service-type server-name
network.node socket hop hopcount
[ preference preference ]
N/A
3. Configure the maximum queue
length of the same service type
items.
ipx sap max-reserve-servers length
Optional.
2048 by default.
The following table gives values of some service types:
Service t
yp
e Value
Unknown 0000h
Print Queue 0003h
File Server 0004h
Job Server 0005h
Print Server 0007h
Archive Server 0009h
Remote Bridge Server 0024h
Advertising Print Server 0047h
Reserved Up To 8000h
Wildcard FFFFh (-1)
Configuring the IPX forwarding feature
Configuration prerequisites
Configure basic IPX.
Configuring IPX forwarding feature
IPX RIP and SAP periodically broadcast updating packets. With the triggered updating feature enabled,
updating packets will be sent only upon route or service information changes, and flooding of
broadcasts can be avoided.
Split horizon can avoid routing loops—routing information received from an interface is not permitted to
be sent from the interface. In some cases, split horizon must be prohibited to ensure correct routing
information transmission. In addition, split horizon prohibition does not take effect on point-to-point links.