R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

100
Table 23 Command output
Field Description
Flags
LACP state flags:
• A—LACP is enabled.
• B—LACP short timeout.
• C—The sending system detects that the link is aggregatable.
• D—The sending system detects that the link is synchronized.
• E—The sending system detects that the incoming frames are collected.
• F—The sending system detects that the outgoing frames are distributed.
• G—The sending system receives frames in default state.
• H—The sending system receives frames in expired state.
Aggregation Interface Aggregate interface to which the member port belongs.
Local Information about the local end.
Port Priority Aggregation priority of the port.
Oper-key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
System ID
Remote end system ID, containing the system LACP priority and the system MAC
address.
Received LACP Packets Total number of LACP packets received.
Illegal Total number of illegal packets.
Sent LACP Packets Total number of LACP packets sent.
display link-aggregation summary
Use display link-aggregation summary to display the summary information for all aggregation groups.
Syntax
display link-aggregation summary [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.