R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

101
Usage guidelines
The information about the remote system for a static link aggregation group may be displayed as none
or may not be displayed, because the aggregation group is not aware of the partner's information.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Select Unselect Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------
BAGG1 S none 1 0 NonS
BAGG10 D 0x8000, 000f-e267-57ad 2 0 NonS
Table 24 Command output
Field Description
Aggregation Interface Type
Aggregate interface type:
• BAGG—Layer 2 aggregate interface.
• RAGG—Layer 3 aggregate interface.
Aggregation Mode
Aggregation group type:
• S—Static link aggregation.
• D—Dynamic aggregation.
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Actor System ID
Local system ID, which contains the system LACP priority and the
system MAC address.
AGG Interface Type and number of the aggregate interface.
AGG Mode Aggregation group type.
Partner ID
System ID of the partner, which contains the system LACP priority
and the system MAC address.
Select Ports Total number of Selected ports.
Unselect Ports Total number of Unselected ports.
Share Type Load sharing type: Only NonS is supported.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups
corresponding to the aggregate interfaces.