R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

102
Syntax
display link-aggregation verbose [ { bridge-aggregation | route-aggregation } [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
route-aggregation: Displays detailed information about the Layer 3 aggregation groups corresponding
to Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface by its number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
To display the information about a specific Layer 2 or Layer 3 aggregation group, use the display
link-aggregation verbose bridge-aggregation interface-number or display link-aggregation verbose
route-aggregation interface-number command.
To display the information about all Layer 2 or Layer 3 aggregation groups, use the display
link-aggregation verbose bridge-aggregation or display link-aggregation verbose route-aggregation
command.
To display the information about all aggregation groups, use the display link-aggregation verbose
command.
The bridge-aggregation or route-aggregation keyword is available only when you create Layer 2 or
Layer 3 aggregate interfaces on the device.
The following matrix shows the keyword and router compatibility:
Ke
y
word MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
bridge-aggregation No Yes No No Yes Yes Yes
Examples
# Display detailed information about the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 10, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing