R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

109
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
Default
The aggregation priority of a port is 32768.
Views
Ethernet interface view
Default command level
2: System level
Parameters
port-priority: Specifies a port aggregation priority in the range of 0 to 65535. The smaller the value, the
higher the port aggregation priority.
Usage guidelines
When the number of ports eligible for becoming Selected ports exceeds the maximum number of
Selected ports allowed in an aggregation group, changing the aggregation priority of a port might
affect the aggregation state of the ports in the aggregation group.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
link-aggregation
port-priority
No Yes No No Yes Yes Yes
Examples
# Set the aggregation priority of port Ethernet 1/1 to 64.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] link-aggregation port-priority 64
mtu
Use mtu to set the MTU of a Layer 3 aggregate interface or subinterface.
Use undo mtu to restore the default setting.
Syntax
mtu size
undo mtu
Default
The MTU for Layer 3 aggregate interfaces and subinterfaces is 1500 bytes.
Views
Layer 3 aggregate interface view, Layer 3 aggregate subinterface view
Default command level
2: System level