R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

110
Parameters
size: Specifies the MTU in the range of 46 to 1560 bytes.
Examples
# Set the MTU of Layer 3 aggregate interface Route-Aggregation 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1] mtu 1430
Related commands
display interface
port link-aggregation group
Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group.
Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to
which it belongs.
Syntax
port link-aggregation group number
undo port link-aggregation group
Views
Ethernet interface view
Default command level
2: System level
Parameters
number: Specifies the number of the aggregate interface corresponding to an aggregation group. The
value range for this argument is 1 to 1024 for Layer 2 aggregate interfaces and 1 to 16 for Layer 3
aggregate interfaces.
Usage guidelines
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
The following matrix shows the argument and router compatibility:
Ar
g
ument MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
number for
Layer 2
aggregate
interfaces
No Yes No No
Yes.
Value
range: 1 to
1024.
Yes.
Value
range: 1 to
1024.
Yes.
Value
range: 1 to
1024.
Examples
# Assign Layer 2 Ethernet interface Ethernet 1/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface ethernet 1/1