R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

112
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member ports, if
no member ports are specified.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number1 [ to interface-type interface-number2 ], where interface-type interface-number
specifies an interface by its type and number.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use shutdown to shut down the aggregate interface or subinterface.
Use undo shutdown to bring up the aggregate interface or subinterface.
Syntax
shutdown
undo shutdown
Default
Aggregate interfaces and subinterfaces are up.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Default command level
2: System level
Usage guidelines
Shutting down or bringing up a Layer 3 aggregate interface also shuts down or brings up its
subinterfaces. Shutting down or bringing up a Layer 3 aggregate subinterface does not affect its main
interface.
The following matrix shows the command and router compatibility in Layer 2 aggregate interface view: