R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

117
Default command level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GVRP state machines in VLAN 2 on port Ethernet 1/1.
<Sysname> display gvrp state interface ethernet 1/1 vlan 2
GVRP state of VLAN 2 on port Ethernet1/1
Applicant state machine : VP
Registrar state machine : MTR
Table 26 Command output
Field Descri
p
tion
GVRP state of VLAN 2 on port Ethernet1/1
Information about the GVRP state machines in VLAN 2 on
port Ethernet 1/1.
Applicant state machine
The Applicant state machine handles attribute declarations.
Its state can be VA, AA, QA, LA, VP, AP, QP, VO, AO, QO,
LO, VON, AON, and QON. Each state consists of two or
three letters with the following meanings:
• The first letter indicates the state: V for Very anxious, A
for Anxious, Q for Quiet, and L for Leaving.
• The second letter indicates the membership state: A for
Active member, P for Passive member, and O for
Observer.
• The third letter N (if any) stands for Non-participant.
For example, VP indicates "Very anxious, Passive member."