R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

118
Field Descri
p
tion
Registrar state machine
The Registrar state machine records the registration of
attributes declared by other participants. Its state can be
INN, LV, L3, L2, L1, MT, INR, LVR, L3R, L2R, L1R, MTR, INF,
LVF, L3F, L2F, L1F, and MTF. Each state consists of two or
three letters or numbers with the following meanings:
• The first two letters or numbers indicate the state: IN
stands for In; LV, L3, L2, and L1 all stand for Leaving, and
L3, L2, L1 are three sub-states of LV; MT stands for Empty.
• The third letter indicates the registration mode: N (if any)
for Normal registration, R for Registration fixed, and F for
Registration forbidden.
For example, MTR stands for "Empty, Registration fixed,"
indicating the fixed registration mode in Empty state.
display gvrp statistics
Use display gvrp statistics to display the GVRP statistics of the specified trunk ports. If no ports are
specified, this command displays the GVRP statistics for all trunk ports.
Syntax
display gvrp statistics [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-list: Displays the GVRP statistics of one or multiple Ethernet ports. You can specify up
to 10 Ethernet port lists, by each of which you can specify an individual port in the form of interface-type
interface-number, or a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end-port number specified by interface-number2 must be greater than the
start-port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GVRP statistics for trunk port Ethernet 1/1.
<Sysname> display gvrp statistics interface ethernet 1/1
GVRP statistics on port Ethernet1/1
GVRP Status : Enabled
GVRP Running : YES