R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

120
Views
Any view
Default command level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about dynamic VLAN operations on Ethernet 1/1.
<Sysname> display gvrp vlan-operation interface ethernet 1/1
Dynamic VLAN operations on port Ethernet1/1
Operations of creating VLAN : 2-100
Operations of deleting VLAN : none
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none
garp timer hold
Use garp timer hold to set the GARP Hold timer for an Ethernet port, Layer-2 aggregate interface, or all
ports in a port group.
Use undo garp timer hold to restore the default of the GARP Hold timer. This might fail if the default is
beyond the valid value range for the Hold timer.
Syntax
garp timer hold timer-value
undo garp timer hold
Default
The Hold timer is 10 centiseconds.
Views
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default command level
2: System level
Parameters
timer-value: Specifies the Hold timer (in centiseconds), which must be a multiple of 5 and range from 10
(inclusive) to half the Join timer (inclusive).