R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

121
Usage guidelines
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR10
00
garp timer hold (Layer
2 aggregate interface
view)
No No No No Yes Yes Yes
Examples
# Set the GARP Hold timer to 15 centiseconds, assuming that the Join timer is 30 centiseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] garp timer hold 15
Related commands
• display garp timer
• garp timer join
garp timer join
Use garp timer join to set the GARP Join timer for an Ethernet port, Layer-2 aggregate interface, or all
ports in a port group.
Use undo garp timer join to restore the default of the GARP Join timer. This might fail if the default is
beyond the valid value range for the Join timer.
Syntax
garp timer join timer-value
undo garp timer join
Default
The Join timer is set to 20 centiseconds.
Views
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default command level
2: System level
Parameters
timer-value: Specifies the Join timer (in centiseconds), which must be a multiple of 5 and range from twice
the Hold timer (inclusive) and half the Leave timer (inclusive).
Usage guidelines
The following matrix shows the command and router compatibility: