R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

124
Related commands
• display garp timer
• garp timer leave
gvrp
Use gvrp to enable GVRP.
Use undo gvrp to disable GVRP.
Syntax
gvrp
undo gvrp
Default
GVRP is disabled.
Views
System view, Ethernet interface view, Layer-2 aggregate interface view, port group view
Default command level
2: System level
Usage guidelines
Settings in system view take effect globally. Settings in Ethernet view or Layer 2 aggregate interface take
effect on the current interface. Settings in port group view take effect on all ports in the port group.
To enable GVRP on a port, enable GVRP globally before you enable it on the port.
In interface view, you can use this command on trunk ports only.
You cannot change the link type of a GVRP-enabled trunk port.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR10
00
gvrp (Layer 2
aggregate interface
view)
No No No No Yes Yes Yes
Examples
# Enable GVRP globally.
<Sysname> system-view
[Sysname] gvrp
GVRP is enabled globally.
Related commands
display gvrp status
gvrp registration
Use gvrp registration to configure the GVRP registration mode.