R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

125
Use undo gvrp registration to restore the default.
Syntax
gvrp registration { fixed | forbidden | normal }
undo gvrp registration
Default
The GVRP registration mode is normal.
Views
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default command level
2: System level
Parameters
fixed: Sets the GVRP registration mode to fixed.
forbidden: Sets the GVRP registration mode to forbidden.
normal: Sets the GVRP registration mode to normal.
Usage guidelines
Settings in system view take effect globally. Settings in Ethernet view or Layer 2 aggregate interface take
effect on the current interface. Settings in port group view take effect on all ports in the port group.
This command is only available on trunk ports.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR10
00
garp registration
(Layer 2 aggregate
interface view)
No No No No Yes Yes Yes
Examples
# Set the GVRP registration mode to fixed on port Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] port link-type trunk
[Sysname-Ethernet1/1] gvrp registration fixed
Related commands
display garp statistics
reset garp statistics
Use reset garp statistics to clear the GARP statistics on the specified ports. If no ports are specified, this
command clears the GARP statistics on all ports.
Syntax
reset garp statistics [ interface interface-list ]