R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

8
Command
MSR9
00
MSR93X
MSR20
-1
X
MSR
20
MSR30 MSR50 MSR1000
mac-address
max-mac-co
unt
No No No No
Yes
Available on
only a
MIM-FSW
module.
The count
argument is in
the range of:
• 0 t o 8191
for
MSR30-11E
and
MSR30-11F.
• 0 to 4096
for others.
Yes
Available on
only a
FIC-FSW
module.
The count
argument is
in the range
of 0 to 4096.
Yes
The count
argument is in
the range of 0
to 4096
Examples
# Set the maximum number of MAC addresses that can be learned on port Ethernet 1/1 to 600. After
this upper limit is reached, frames received with unknown source MAC addresses on the port are not
forwarded.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mac-address max-mac-count 600
[Sysname-Ethernet1/1] mac-address max-mac-count disable-forwarding
Related commands
• mac-address (system view)
• mac-address (interface view)
• mac-address timer
mac-address timer
Use mac-address timer to configure the aging timer for dynamic MAC address entries.
Use undo mac-address timer to restore the default.
Syntax
mac-address timer { aging seconds | no-aging }
undo mac-address timer aging
Default
The aging timer for dynamic MAC address entries is 300 seconds.
Views
System view
Default command level
2: System level