R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

138
Field Descri
p
tion
Port status of LLDP Indicates whether LLDP is enabled on the port.
Admin status
LLDP mode of the port:
• TxRx—The port can send and receive LLDPDUs.
• Rx_Only—The port can only receive LLDPDUs.
• Tx_Only—The port can only send LLDPDUs.
• Disable—The port cannot send or receive LLDPDUs.
Trap Flag Indicates whether trapping is enabled.
Polling interval LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors Number of LLDP neighbors connecting to the port.
Number of MED neighbors Number of MED neighbors connecting to the port.
Number of sent optional TLV Number of optional TLVs contained in an LLDPDU sent through the port.
Number of received unknown TLV Number of unknown TLVs contained in all received LLDPDUs.
display lldp tlv-config
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of interface Ethernet 1/1.
<Sysname> display lldp tlv-config interface ethernet 1/1
LLDP tlv-config of port 1[Ethernet1/1]:
NAME STATUS DEFAULT