R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

142
Use undo lldp encapsulation to restore the default encapsulation format for LLDPDUs.
Syntax
lldp encapsulation snap
undo lldp encapsulation
Default
Ethernet II is the encapsulation format for LLDPDUs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Examples
# Configure the encapsulation format for LLDPDUs as SNAP on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] lldp encapsulation snap
lldp fast-count
Use lldp fast-count to set the number of the LLDPDUs sent each time fast LLDPDU transmission is triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 3.
Views
System view
Default command level
2: System level
Parameters
count: Sets the number of the LLDPDUs sent each time fast LLDPDU transmission is triggered. The value
range is 1 to 10.
Examples
# Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 4
lldp hold-multiplier
Use lldp hold-multiplier to set the TTL multiplier.