R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

143
Use undo lldp hold-multiplier to restore the default.
Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
Default
The TTL multiplier is 4.
Views
System view
Default command level
2: System level
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
Usage guidelines
You can set the TTL of the local device information by configuring the TTL multiplier.
The TTL configuration of a device is determined by the expression:
TTL multiplier × LLDPDU transmit interval
The TTL can be up to 65535 seconds. Longer TTLs will be rounded off to 65535 seconds.
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval
lldp management-address-format string
Use lldp management-address-format string to encapsulate the management address in the form of
strings in TLVs.
Use undo lldp management-address-format to restore the default.
Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The management address is encapsulated in the form of numbers in TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level