R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

151
Port isolation configuration commands
The HP MSR series routers support only one isolation group that is created automatically as isolation
group 1. You can neither remove the isolation group nor create other isolation groups.
display port-isolate group
Use display port-isolate group to display information about port isolation group 1.
Syntax
display port-isolate group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display port isolation group information.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Group members:
Ethernet1/2
Table 33 Command output
Field Description
Port-isolate group information Displays port isolation group information.
Uplink port support
The isolation group does not support the uplink port. This
field always displays NO.
Group ID Isolation group number, which is always 1.
Group members Isolated ports in the isolation group.