R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

37
Super VLAN configuration commands
The following matrix shows the super VLAN configuration commands and router compatibility:
Commands MSR900 MSR93X
MSR20-1
X
MSR20 MSR30 MSR50
MSR10
00
Super VLAN
configuration
commands
No No No No
Available
only on fixed
Layer 2
Ethernet
interfaces of
MSR30-11E
and
MSR30-11F
routers and
on MSR30-10
routers
installed with
XMIM Layer 2
switching
modules
No No
display supervlan
Use display supervlan to display the mapping between a super VLAN and sub-VLANs, and to display
information about these VLANs.
Syntax
display supervlan [ supervlan-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
supervlan-id: Specifies a super VLAN ID in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the mapping between a super VLAN and sub-VLANs.