R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

65
reset stp
Use reset stp to clear the MSTP statistics information.
Syntax
reset stp [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface interface-list: Clears the MSTP statistics of the ports specified in the format of interface-list =
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
indicates that you can specify up to 10 ports or port ranges. If you don't specify this option, the command
clears the spanning tree-related statistics on all ports.
Usage guidelines
The MSTP statistics information includes the numbers of TCN BPDUs, configuration BPDUs, RST BPDUs
and MST BPDUs sent/received through the specified ports.
Examples
# Clear the spanning tree-related statistics on ports Ethernet 1/1 through Ethernet 1/3.
<Sysname> reset stp interface ethernet 1/1 to ethernet 1/3
Related commands
display stp
revision-level
Use revision-level to configure the MSTP revision level.
Use undo revision-level to restore the default MSTP revision level.
Syntax
revision-level level
undo revision-level
Default
The MSTP revision level is 0.
Views
MST region view
Default command level
2: System level
Parameters
level: Specifies an MSTP revision level in the range of 0 to 65535.