R2511-HP MSR Router Series Layer 2 - LAN Switching Command Reference(V5)

82
Syntax
stp region-configuration
undo stp region-configuration
Views
System view
Default command level
2: System level
Usage guidelines
These are the default settings for the MST region:
• The MST region name of the device is the MAC address of the device.
• All VLANs are mapped to the CIST.
• The MSTP revision level is 0.
After you enter MST region view, you can configure the MST region-related parameters, including the
region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region]
stp root primary
Use stp root primary to configure the device as the root bridge.
Use undo stp root to restore the default.
Syntax
stp [ instance instance-id ] root primary
undo stp [ instance instance-id ] root
Default
A device is not a root bridge.
Views
System view
Default command level
2: System level
Parameters
instance instance-id: Configures the device as the root bridge in a particular MSTI. The minimum value
of instance-id is 0, representing the CIST, and the maximum value of instance-id is 15.
Usage guidelines
To set an MSTP device as the root bridge in a specific MSTI, use this command with the MSTI specified.
Once you specify the device as the root bridge, you cannot change the priority of the device.