R2511-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V5)

103
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the GARP LeaveAll
timer.
garp timer leaveall timer-value
Optional.
The default setting is 1000
centiseconds.
The LeaveAll timer applies to all
ports.
3. Enter Ethernet interface view.
• Enter Ethernet interface view or
Layer 2 aggregate interface
view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use one of the commands.
4. Configure the Hold timer.
garp timer hold timer-value
Optional.
The default setting is 10
centiseconds.
5. Configure the Join timer.
garp timer join timer-value
Optional.
The default setting is 20
centiseconds.
6. Configure the Leave timer.
garp timer leave timer-value
Optional.
The default setting is 60
centiseconds.
Displaying and maintaining GVRP
Task Command Remarks
Display statistics about GARP on ports.
display garp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display GARP timers on ports.
display garp timer [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the local VLAN information
that GVRP maintains on ports.
display gvrp local-vlan interface
interface-type interface-number [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display the current GVRP state in the
specified VLANs on ports.
display gvrp state interface interface-type
interface-number vlan vlan-id [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display GVRP statistics on ports.
display gvrp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the global GVRP state.
display gvrp status [ | { begin | exclude |
include } regular-expression ]
Available in any view.