Manualshelf

R2511-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
131132133134135136137138139140
128
Figure 42 VLAN termination for inter-VLAN communication
VLAN termination configuration task list
Task Remarks
Configuring unambiguous Dot1q termination Required.
Configuring the TPID for VLAN-tagged packets Optional.
Configuring unambiguous Dot1q termination
Unambiguous Dot1q termination receives only VLAN-tagged packets whose outermost VLAN IDs match
the specified VLAN ID and does not allow any other VLAN-tagged packets to pass through this
subinterface. When the subinterface receives a packet, it removes the outermost VLAN tag of the packet.
When the subinterface sends out a packet, it adds a VLAN tag carrying the specified VLAN ID to the
packet.
To configure unambiguous Dot1q termination:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A