R2511-HP MSR Router Series Layer 2 - LAN Switching Configuration Guide(V5)

90
Step Command Remarks
2. Enter aggregate interface
view.
• Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
• Enter Layer 3 aggregate interface
view:
interface route-aggregation
interface-number
Use either command.
3. Restore the default settings for
the aggregate interface or
subinterface.
default N/A
Displaying and maintaining Ethernet link
aggregation
Task Command Remarks
Display information about
aggregate interfaces.
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display the local system ID.
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display detailed link aggregation
information for link aggregation
member ports.
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display summary information
about all aggregation groups.
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display detailed information about
a specific or all aggregation
groups.
display link-aggregation verbose
[ { bridge-aggregation | route-aggregation }
[ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Clear LACP statistics for a specific
or all link aggregation member
ports.
reset lacp statistics [ interface interface-list ]
Available in user
view.
Clear statistics for a specific or all
aggregate interfaces.
reset counters interface [ { bridge-aggregation |
route-aggregation } [ interface-number ] ]
Available in user
view.
Ethernet link aggregation configuration examples
In an aggregation group, only ports that have the same port attributes and class-two configurations (see
"Configuration classes") a
s the reference port (see "Reference port") can operate as Selected ports.
Make sure all member ports have the same port attributes and class-two configurations as the reference
port. The other settings only need to be configured on the aggregate interface, not on the member ports.