R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

90
isdn pri-slipwnd-size
Use isdn pri-slipwnd-size to set the sliding window size on a PRI interface.
Use undo isdn pri-slipwnd-size or isdn pri-slipwnd-size default to restore the default sliding window size
on the PRI interface.
Syntax
isdn pri-slipwnd-size window-size
undo isdn pri-slipwnd-size
isdn pri-slipwnd-size default
Default
The sliding window size on PRI interfaces is 7.
Views
Interface view
Default command level
2: System level
Parameters
window-size: Sliding window size in the range of 5 to 64.
Examples
# Configure the sliding window size on interface CE1/PRI 1/0 as 10.
<Sysname> system-view
[Sysname] controller e1 1/0
[Sysname-E1 1/0] using ce1
[Sysname-E1 1/0] pri-set
[Sysname-E1 1/0] quit
[Sysname] interface serial 1/0:15
[Sysname-Serial1/0:15] isdn pri-slipwnd-size 10
isdn progress-indicator
Use isdn progress-indicator to set the progress indicator value in the ISDN signaling messages sent by
an ISDN interface.
Use undo isdn progress-indicator to restore the default.
Syntax
isdn progress-indicator indicator
undo isdn progress-indicator [ indicator ]
Default
The progress indicator value set by the upper-layer voice service applies.
Views
ISDN interface view