R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

95
speech: Specifies the speech service.
Usage guidelines
This command is available only on voice interfaces such as BSV, VE1, and VT1 interfaces.
Examples
# Specify the service type as audio in the ISDN Bearer Compatibility signaling.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn service audio
isdn spid auto_trigger
Use isdn spid auto_trigger to enable SPID auto-negotiation once on the BRI interface running the NI
protocol.
Syntax
isdn spid auto_trigger
Default
A BRI interface does not originate a SPID negotiation request unless triggered by a call.
Views
ISDN BRI interface view
Default command level
2: System level
Usage guidelines
On a BRI interface compliant with the North American ISDN protocol, the router can place a call only
after SPID negotiation or initialization. SPID information can be obtained through static configuration or
dynamic negotiation. You can manually trigger a new SPID negotiation request by executing this
command if the SPID negotiation in dynamic negotiation fails or is just for the purpose of testing.
This command applies only on the BRI interface running the NI protocol.
Examples
# Manually trigger a new SPID negotiation request on interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn spid auto_trigger
isdn spid nit
Use isdn spid nit to set the SPID processing mode to not initial terminal (NIT) on a BRI interface running
the NI protocol.
Use undo isdn spid nit to disable the NIT mode on the BRI interface.
Syntax
isdn spid nit
undo isdn spid nit