R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

97
Examples
# Set the time-out value of TSPID on interface BRI 2/0 to 50 seconds.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn spid timer 50
isdn spid service
Use isdn spid service to configure the service types that must be supported in SPID negotiation on the BRI
interface running the NI protocol.
Use undo isdn spid service to delete the service types that must be supported in SPID negotiation on the
BRI interface running the NI protocol.
Syntax
isdn spid service [ audio | data | speech ]
undo isdn spid service
Default
SPID needs to support data and voice service simultaneously.
Views
ISDN BRI interface view
Default command level
2: System level
Parameters
audio: Supports audio service.
data: Supports data service.
speech: Supports voice service.
Usage guidelines
Three types of services exist. You can select any one or none. None means all services are supported. For
the BRI interface running the NI protocol, you must negotiate or initialize SPID before originating a call.
During negotiation, SPCS might send multiple SPIDs and carry the service types supported by the SPID,
and the router needs to choose a proper SPID according to the local service type.
This command can only be applied on the BRI interface running the NI protocol.
Examples
# Set the service type supported by BRI interface to data and voice.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn spid service data
[Sysname-Bri2/0] isdn spid service speech
isdn spid resend
Use isdn spid resend to set the number of INFORMATION message retransmission attempts for SPID
negotiation or initialization on a BRI interface running the NI protocol.