R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

111
Field Descri
p
tion
create time = 2002/10/21 14:48:44 Time and date when the map entry was created.
status = ACTIVE State of the map entry.
encapsulation = ietf IETF frame relay is adopted for Layer 2 encapsulation.
vlink
Value of the map entry in the route-to-frame relay
address mapping table. The value of 0 indicates that
the route is invalid. When the value is not 0, the
system uses the value to look up the corresponding
map entry, and then look up the corresponding DLCI.
broadcast Broadcasts are permitted.
Related commands
• fr map ip
• fr inarp
display fr pvc-info
Use display fr pvc-info to display state information on FR PVCs and statistics about data sent and
received on them.
Syntax
display fr pvc-info interface interface-type { interface-number | interface-number.subnumber }
[ dlci-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its
type and number. It can be a main or subinterface. The interface-number argument is a main interface
number. The subnumber argument is a subinterface number, in the range 0 to 1023.
dlci-number: virtual circuit number of frame relay interface. It is in the range of 16 to 1007.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you use the command with no interface or DLCI specified, the displayed information covers all PVCs.
If you use the command with an interface (a main interface or subinterface) specified, the displayed
information covers only the PVCs on the interface.