R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

112
If you use the command with a DLCI specified, the displayed information covers only the specified PVC.
Examples
# Display the frame relay PVC table.
<Sysname> display fr pvc-info
PVC statistics for interface Serial2/0 (DTE, physical UP)
DLCI = 100, USAGE = UNUSED (0000), Serial2/0
create time = 2000/04/01 23:55:39, status = ACTIVE
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
DLCI = 102, USAGE = LOCAL (0010), Serial2/0.1
create time = 2000/04/01 23:56:14, status = ACTIVE
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
Table 23 Command output
Field Descri
p
tion
PVC statistics for interface Serial2/0 (DTE, physical
UP)
Display information about PVCs on the frame relay
interface Serial 2/0. The interface operates in DTE
mode, and is physically up.
DLCI = 100, USAGE = UNUSED (0000), Serial2/0
DLCI 100 was assigned to the PVC through
negotiation of LMI with DCE end. Its state is unused,
and it belongs to interface Serial 2/0.
create time = 2000/04/01 23:55:39, status =
ACTIVE
Date and time creating the PVC and the state of the
PVC.
in BECN = 0, in FECN = 0 Received BECNs and FECNs.
in packets = 0, in bytes = 0 Received frames and bytes.
out packets = 0, out bytes = 0 Sent frames and bytes.
Related commands
fr dlci
display fr statistics
Use display fr statistics to display current frame relay statistics about received and sent packets for the
specified or all main interfaces.
Syntax
display fr statistics [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level