R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

113
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, the frame relay statistics for all interfaces are displayed.
You can use this command to check frame relay traffic statistics and diagnose problems.
Examples
# Display frame relay statistics about received and sent packets.
<Sysname> display fr statistics
Frame relay packet statistics for interface Serial2/0 (DTE)
in packets = 84, in bytes = 1333
out packets = 92, out bytes = 1217
discarded in packets = 13, discarded out packets = 0
Frame relay packet statistics for interface Serial2/0.1 (DCE)
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
discarded in packets = 0, discarded out packets = 0
Table 24 Command output
Field Descri
p
tion
Frame relay packet statistics for interface Serial2/0
(DTE)
Display frame relay packet statistics for the interface
Serial 2/0, which operates as a DTE.
in packets = 84, in bytes = 1333 Received packets and bytes.
out packets = 92, out bytes = 1217 Sent packets and bytes.
discarded in packets = 13, discarded out packets = 0 Dropped incoming/outgoing packets.
display x25 template
Use display x25 template to display the configuration of an X.25 template, including the configuration
concerning X.25 and LAPB. If you do not specify the name argument, this command displays the
configurations of all the X.25 templates.
Syntax
display x25 template [ name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view