R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

115
Field Descri
p
tion
Channels
Channel range types:
• Incoming-only—Channel range of incoming-only calls.
• Two-way—Two-way channel range.
• Outgoing-only—Channel range of outgoing-only calls.
Window size
Window size:
• In—Receiving window size.
• Out—Transmitting window size.
Packet size
Packet size:
• In—Maximum X.25 packet size allowed for receiving.
• Out—Maximum X.25 packet size allowed for transmitting.
LAPB parameters LAPB-related settings.
Modulo Modulo for numbering LAPB frames.
N1 Maximum packet size (in bytes) a DCE/DTE allows.
N2 Maximum number of retries allowed for an DTE/DCE to transmit a packet.
Timers
Timers:
• T1—Transmission timer.
• T2—Receiving timer.
• T3—Idle channel timer.
Related commands
• x25 template
• x25-template
fr dlci
Use fr dlci to configure a virtual circuit on a frame relay interface and enter the view of the virtual circuit.
Use undo fr dlci to remove a virtual circuit. If no virtual circuit is specified, all virtual circuits on the
interface are removed.
Syntax
fr dlci dlci-number
undo fr dlci [ dlci-number ]
Views
Interface view
Default command level
2: System level
Parameters
dlci-number: Assigns a virtual circuit to the frame relay interface, in the range 16 to 1007. The range 0
to 15 and 1008 to 1023 are reserved for special purposes.
Usage guidelines
A virtual circuit number is unique on a physical interface.