R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

126
Examples
# Create a static address map entry on interface Serial 2/0, mapping DLCI 50 to the peer IP address
202.38.163.252.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr map ip 202.38.163.252 50
fr switch
Use fr switch name interface interface-type interface-number dlci dlci1 interface interface-type
interface-number dlci dlci2 to create a PVC used for FR switching.
Use fr switch name to enter the view of a PVC used for FR switching.
Use undo fr switch to delete a specified PVC.
Syntax
fr switch name [ interface interface-type interface-number dlci dlci1 interface interface-type
interface-number dlci dlci2 ]
undo fr switch name
Default
No PVC used for FR switching exists.
Views
System view
Default command level
2: System level
Parameters
name: Name of a PVC used for FR switching, which is a string of 1 to 30 characters.
interface interface-type interface-number dlci dlci1: DLCI number at one end of PVC as well as the type
and number of its interface.
interface interface-type interface-number dlci dlci2: DLCI number at the peer end of PVC as well as the
type and number of its interface.
Usage guidelines
The interface for forwarding packets can be either a frame relay interface or an MFR interface. If a tunnel
interface is specified as the forwarding interface, frame relay over IP can be realized.
In the view of a PVC used for FR switching, you can use the shutdown/undo shutdown command to shut
down or bring up the FR switching PVC and affect the routing table.
Examples
# Create a PVC named pvc1 on the DCE serving as the switch, which is from the DLCI 100 of serial
interface 2/0 to the DLCI 200 of serial interface 2/1.
<Sysname> system-view
[Sysname] fr switching
[Sysname] fr switch pvc1 interface serial 2/0 dlci 100 interface serial 2/1 dlci 200
[Sysname-fr-switching-pvc1]