R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

129
Views
Traffic behavior view
Default command level
2: System level
Parameters
fr-de-value: DE bit value in FR frames. It takes 0 or 1.
Examples
# Set the DE bit of FR frames to 1.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark fr-de 1
Related commands
• qos policy
• traffic behavior
• classifier behavior (ACL and QoS Command Reference)
reset fr inarp
Use reset fr inarp to clear the address mapping established by inverse ARP.
Syntax
reset fr inarp
Views
User view
Default command level
2: System level
Usage guidelines
In some special cases, for example, when the network topology changes, the dynamic address maps
originally established will become invalid. You must establish them again. You can use this command to
clear all the dynamic address maps.
Examples
# Clear all the frame relay dynamic address maps.
<Sysname> reset fr inarp
Related commands
fr inarp
reset fr pvc
Use reset fr pvc to clear the statistics on a PVC.
Syntax
reset fr pvc interface serial interface-number [ dlci dlci-number ]