R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

131
Default
The parameter is 10 seconds.
Views
Interface view
Default command level
2: System level
Parameters
seconds: Value of T391 parameter at DTE side, which is in the range of 0 to 32767 in seconds. 0
indicates that the LMI protocol is disabled.
Usage guidelines
The parameter is a time variable that defines the interval at which the DTE sends Status-Enquiry
messages.
Examples
# Configure that frame relay interface Serial 2/0 to operate in DTE mode, and set the value of T391
parameter to 15 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr
[Sysname-Serial2/0] fr interface-type dte
[Sysname-Serial2/0] timer hold 15
Related commands
fr lmi t392dce
x25-template
Use x25-template to apply an X.25 template to a VC.
Use undo x25-template to cancel the X.25 template application.
Syntax
x25-template name
undo x25-template name
Views
DLCI interface view
Default command level
2: System level
Parameters
Name: Name of an X.25 template, which is a string of 1 to 30 characters.
Usage guidelines
Annex G implements X.25 over FR. You can configure X.25 parameters for an X.25 over FR DLCI by
using the x25 template command and apply the template in DLCI interface view.