R2511-HP MSR Router Series Layer 2 - WAN Command Reference(V5)

133
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the DLCI statistics for all main interfaces.
Examples
# Display the frame relay compression statistics of FRF.9 stac.
<Sysname> display fr compress
Serial2/0
-DLCI:22
enable frame-relay compression
uncompressed bytes send/receive : 0/0
compressed bytes send/receive : 0/0
1 min avg ratio send/receive : 0.000/0.000
5 min avg ratio send/receive : 0.000/0.000
Table 26 Command output
Field Descri
p
tion
enable frame-relay compression Frame relay compression is enabled.
uncompressed bytes send/receive
Size of the uncompressed data sent/received (in
bytes)
compressed bytes send/receive Size of the compressed data sent/received (in bytes)
1 min avg ratio send/receive
Average transmission/receiving rate during the latest
1 minute.
5 min avg ratio send/receive
Average transmission/receiving rate during the latest
5 minutes.
Related commands
fr compression frf9
display fr iphc
Use display fr iphc to display statistics about frame relay FRF.20 compression for the specified or all main
interfaces.